Status SEM1605THV Thermistor, Pt1000 temperature transmitter with voltage output

• Thermistor, Pt1000 temperature transmitter with voltage output
• Suitable for Thermistor, Pt1000 or Pt500 temperature sensors
• 3 wire (0 to 10) volt output
• Other sensors available from library
• High stability

The SEM1605THV is a DIN rail mounted Voltage Output temperature transmitter from Status Instruments. It has been designed to accept most common thermistor temperature sensor inputs together with Pt1000 and Pt500 RTD inputs and provide the user with a standard three wire (0 to 10) volt output signal. The output signal is linear to temperature.

Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM1605THV and your PC. Our free configuration software will guide you through any changes you wish to make. To further help save time, the SEM1605THV does not need to be wired to a power supply during the configuration process.

ACTIVE RANGE

The SEM1605THV is provided with a user push-button ranging option, allowing adjustments at both 0 V and 10 V against a live input. The ‘user adjust’ function can be locked during configuration if not required. The state LED indicates out of range input during normal operation; during ‘user adjust’ it is also used to indicate the stage of adjustment. (0 and 10) V TRIM The buttons can also be used for 0 V and 10 V trim adjustment to add small offsets to (0 or 10) V output.

SENSOR REFERENCING

The SEM1605THV sensor referencing, via the Windows based USB-Speedlink software, allows for close matching to a known reference sensor, eliminating possible sensor errors.

SENSOR LIBRARY

The sensor type required is loaded onto the SEM1605THV from a software library using the USB-Speedlink software. The sensor library can be added to as new sensors become available or are requested. Thermistor sensors with a resistance value up to 100 K Ohms can normally be accommodated.

USB PC CONFIGURATION

The SEM1605THV is quick and easy to configure using a standard-type USB lead and the free-of-charge USBSpeedLink Windows software.

USB VIEW

The SEM1605THV can be connected to an android phone or tablet using an OTG USB adaptor. Running a free App, the Android device can then be used to view live data from the SEM1605THV.

STABILITY

The SEM1605THV DIN rail transmitter incorporates digital technology to ensure accurate low drift performance.