Termopar con aislamiento mineral con olla roscada y 100 mm de cable IEC de doble torsin con aislamiento de PFA - Tipos K, J, T, N
Cambiar moneda
Termopar con aislamiento mineral en varias longitudes terminadas con 100 mm, IEC doble trenzado con aislamiento de PFA, 7/0,2 mm.
Necesita calibrar su sensor de temperatura? | Trazable a los estndares de calibracin ISO17025 (UKAS), Labfacility ofrece la opcin de una calibracin trazable de 3 o 5 puntos utilizando nuestras instalaciones de calibracin internas. Tenga en cuenta que si agrega una opcin de calibracin a su pedido, se comunicar con usted con respecto a la informacin de entrega. |
|---|
Caractersticas tcnicas
| Descripción General | Mineral insulated thermocouple in various lengths terminatied with 100mm,PFA insulated twin twisted IEC,7/0.2mm. |
|---|---|
| Tipo de sensor | Mineral Insulated |
| Tipo de termopar | K,J,T,N |
| Element/hot junction | Single element, junction insulated from sheath (offers protection against spurious electrical signals) |
| Diámetro de la sonda | 1.0, 1.5, 3.0, 4.5 & 6.0mm |
| Longitud de la sonda | 150, 250, 500, 1000, 1500 & 2000mm |
| Material de la funda | K - Stainless steel 310, J - Stainless steel 321, T - Stainless steel 316, N - Nicrosil |
| Tipo de maceta | M8 x 1.0mm fine pitch threaded pot seal (200°C) |
| Longitud del cable | 100mm |
| Cable Type | PFA insulated twin twisted IEC |
| Núcleo / hebras | 7/0.2mm |
| Tipo de terminación | Bare tails |
| Max. Temperatura | K +1100°C for 1.5 & 3.0mm diameters +750°C for 1.0mm diameter, J +760°C, T +400°C, N +1300°C. |
| Min. Temperatura | K -40°C, J -100°C, T -100°C, N -100°C |
| Estándares cumplidos | In accordance with IEC 584 |
Labfacility - Company Overview Presentation
Labfacility - Company Video Presentation featuring, Mineral Insulated Cable Preparation, In-House Welding, Thorough Inspection from our Quality Department, Thermocouple Cable reeled to correct spool lengths, Dedicated work stations for the various sensor configurations, Calibration Test room and Large quantities kept in stock for fast despatch.
Why is Calibration so important?
The goal of calibration is to minimise any measurement uncertainty by ensuring the accuracy of test equipment. Labfacility offer a 3 or 5 point calibration, Traceable to ISO17025 (UKAS) calibration standards, using our in-house calibration facility.
Thermocouple Product Guide - Labfacility
An overview of the different thermocouples available from Labfacility.
